A factory fender flare is trim placed around the outside of the wheel well to both protect the vehicle from grime and road debris and enhance the vehicles appearance. I have added a typical photo of what fender flares look like.
The WeatherTech Mud Flaps # WT110005-120005 you referenced are compatible with your 2003 Chevrolet Silverado if they have the factory fender flares. I have provided links to the installation instructions for these mud flaps.
If your truck does not have the fender... view full answer...
The Thomas Payne Euro RV Recliner Chair w/ Footrest is only available in Oxford Walnut, # 195-000062 or Oxford Tan, # 195-000061. This PolyHyde is essentially European leather with a polymer coating.The PolyHyde is a durable material since it is polymer coated, so you do not have to worry about early wear from normal use. view full answer...
We went ahead and took a look for you at the Dexter Bearing, 42MM Nev-R-Lube 42MM x 76MM x 39MM # 31-73-3.
I can tell you that what we have is indeed a Timken product that is made in the USA; it says so right on the bearing.
I have added a link below to a video review for you to check out as well of the Dexter Bearing, 42MM Nev-R-Lube 42MM x 76MM x 39MM # 31-73-3. view full answer...
The Stake Pocket Tie-Down Anchors # PK-SPTD are is manufactured in China. If you are looking for an option that is manufactured in the U.S., I recommend the Brophy Stake Pocket Tie Down Anchor # TL2B. The ring is a bit larger on the Brophy (3 inches) and you will have the same 4,000-pound maximum weight capacity as the # PK-SPTD. view full answer...
Reese Elite underbed rails and the Ford hitch prep packages are the exact same underbed rail systems. Reese makes the kits for Ford. For more info on this check out the link I attached to the right.
The Curt leg kit part # C16017 that you referenced would install in either the Reese Elite or the Ford hitch prep package as long as everything was installed correctly. We have not heard of any issues where the Curt hitches designed for the Ford hitch prep didn't fit. view full answer...
The trailer wiring we offer like part # A40W5B, is designed to be used as a 5-wire harness, and works well with a trailer that has a surge coupler. The wires used in this harness are 16 gauge except the blue brake wire which is 18 gauge, and designed to be able to safely handle the current from a 12 volt system. The wires in this harness are not tinned.
From my research I found that tinned wire is normally used in industrial wiring and used when the operating temperature of the wire is... view full answer...
I'm not sure what you would call that on the back of the K-Source Replacement Side Mirror - Electric/Heat w LED Signal # KS62133G, and it doesn't extrude from the housing at all. I've attached a side photo to show it better. It definitely looks a bit more glossy than the rest of the housing, but I think part of it is the lighting too. view full answer...
The license plate bracket for the Hopkins Smart Hitch Backup Camera # HM50002 is indeed made up of a durable plastic. This keeps it strong enough to hold up to everyday use while also eliminating any concerns over rust and corrosion since it's going to be sitting out in the elements.
I have attached a short video demonstration on this system that you can check out as well. view full answer...
The CIPA Universal Fit Towing Mirror, Clamp On # CM11980 is a flat mirror, meaning that the mirror will give you an accurate view of the traffic behind you. This mirror will not need the "Objects in mirror are closer than they appear" warning.
I've attached a review video of this mirror for you. view full answer...
The Brophy scissor steps # SS03 are steel with a black powder coat. Steel can rust if it is exposed to the elements. Eventually the powder coat can get chips or scratches in it exposing the steel and then it can start to rust. If you notice scratches or chips you can spray paint over them to help prevent corrosion.
Another option is to go with the aluminum version, # AS03. Aluminum is naturally corrosion resistant and will not rust like steel. I have linked a video review of the aluminum... view full answer...
According to Go Power the Go Power Portable Power Bank with Solar Panels # GP22RR uses Monocrystalline solar cells which would mean they are silicon based. view full answer...
I do have an alternate solution, however the Phoenix Faucets Hybrid RV Bathroom Faucet # PF232401 that you mention is not made in the USA.
Instead, I recommend going with the LaSalle Bristol Utopia RV Bathroom Faucet # 34420377R300NABX which features the same spout length as # PF232401, virtually similar product dimensions, and is made in the USA. view full answer...
Bearings and races last quite a while and we recommend repacking grease once a year. But other factors to consider is how many miles are put on your trailer and the conditions you are driving in.
Every time you are repacking grease, it's a good idea to examine the races and bearings for discoloration from heat, dark spots on the races, cracks or nicks. If you happen to see any of those I would replace the bearings or races.
Take a look at the video and the couple informative articles... view full answer...
The CIPA Wedge-Shaped, Stick-On HotSpot Mirror - 2-1/2" x 3-3/4" - Convex # CM49702 are made from a plastic with a double sided film for the mirroring. The plastic mirror with the double sided film is going to be the industry standard for this style of blind spot mirror and I wasn't able to locate anything similar that used glass. view full answer...
If you are looking for a wheel that is made in the USA, then I recommend the Dexstar Steel Mini Mod Trailer Wheel, # AM20365.
This steel wheel measures 14 x 5-1/2 and has a 5 on 4-1/2 bolt pattern. The wheel has a white powder coat finish and a weight capacity of 2,040 lbs. view full answer...
I checked with the manufacturer and found out that the Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 80" Long - 500 lbs # UF48-979033 weighs 51 lbs.
I have added links to a couple video reviews of this carrier for you to check out. view full answer...